2017 Land Pride FM4188

Call for Price

Land Pride



Land Pride's FM41 Series Flail Mower offers 3/16" deck material and utilizes a threaded rod to easily offset the hitch by nearly 8". The gearbox incorporates an over-running clutch that enables the rotor to swing free to a stop when the tractor PTO has been turned off. The 41 Series also offers cast and machined hammers and brush rake teeth to shred prunings and to provide a nice clean cut in grass. Thirteen adjustable brush rake teeth also keep clippings in the blade path for maximum mulching.

  • 88” Cutting width: A good cutting width for many applications.
  • 3-Point screw type hitch can be offset 7 3/4” Left & right: Easily offset the hitch for a closer cut alongside buildings, fences, roadsides and for getting under tree limbs.
  • ACME threads on offset: ACME threads are deeper allowing for easy screwing adjustment.
  • One year gearbox warranty: The gearbox is designed tough to withstand the rigors of flail mowing.
  • 540 RPM cast iron gearbox with over-running clutch: Enables the rotor to free swing to a stop when the tractor PTO has been turned off.
  • 1/2” – 6” Cutting height: Variable cutting heights for many uses. Lowest cutting height allows for scalping in grasses such as Bermuda prior to overseeding.
  • 2” Cutting capacity: Cut saplings when used in a rough setting.
  • Cast & machined hammer knives: Cast & machined hammers are just right for chopping up prunings up to 2" thick, but will also groom grass in a very acceptable manner.
  • 5 1/2” Rotor diameter: Large rotor is able to take rough conditions.
  • Reverse rotor rotation: Brings the cut material up and over which allows it to be dispersed more evenly.
  • High knife tip speed: Knife tip speed of 9,805 fpm for cleaner cut.
  • Cat. 4 driveline: Heavy-duty driveline matches up with HP range as well as potential conditions.
  • 4 - 'B' Section belts: 'B' Section belts have more surface to pulley contact and fits deeper in the groove.
  • 3/16” Deck thickness: Allows the mower to handle rough conditions.
  • Baffles on top inside of deck: Keeps cut material from clumping together, ensuring an even distribution of clippings.
  • Height adjusting roller: Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns.
  • Standard scrapers on rear height adjusting roller: Keeps roller clean for consistent cutting height.
  • Cutting Width: 88 in.
  • Overall Width: 96 in.
  • Height: 45 in.
  • Depth: 43 in.
  • Approximate Machine Weight: 1323 lbs.
  • Cutting Capacity: 2 in.
  • Cutting Height: 1/2 - 6 in.
  • Deck Material Thickness: 3/16 in.
  • Knives: Hammer Knives
  • Rotor Shaft Speed: 2140 RPM
  • Rotor Diameter: 5 1/2 in.
  • Rotor Rotation: Reverse
  • Knife Tip Speed: 9805 fpm
  • Number of Knives: 24 Forged hammer knives
  • Hitch Type: Cat. l and ll offset hitch
  • Offset Hitch: 7 3/4 in. Left & Right, Manual Screw-Type
  • PTO Speed: 540 RPM
  • Driveline: Cat. 4
  • Belt Type: (4) - "SPB" Section belts
  • Gearbox Type: 540 RPM with internal over-running Clutch
  • Gearbox Rating: 80 HP
  • Gearbox Lubrication: SAE EP 90W
  • Gearbox Oil Capacity: 3.3 pints
  • Rear Roller Diameter: 5 1/2 in.
  • Brush Rake Teeth: 13 each



Working Width
88 in.
96 in.
1323 lb.

Related Products