2017 Land Pride HD35 - 3-Point Mount

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
HD35 - 3-Point Mount

Overview

Description

The HD35 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They are available with a bolt-on mount for mounting to the side of a bucket, on a tractor front-end loader, or with a boom for mounting to a category 1 or 2 three-point hitch. The HD35 series requires a hydraulic flow system capable of producing 10 to 25 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the three-point mounted post hole diggers.



The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD35 Series will deliver up to 1,605 ft.lbs of torque when industrial duty is preferred.

Features
  • 3-Point Cat. 1 or 2 Hitch: Fits a wider variety of tractors by fitting Cat. 1 & 2.
  • Bucket Mount Option: Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground
  • 2 7/8” yoke tubing – schedule 40 pipe: 3/16+ wall thickness for strength and durability.
  • 3 1/2” Reinforced boom tubing: 7/32” wall tubing for strength.
  • Auger flighting: Constant thickness on 1/4" flighting vs. tapered.
  • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips.
  • 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers.
  • Hydraulic hose: Standard on 3-point model, option on bucket mount due to distance varying on tractor models.
  • Auger Sizes: 6”, 9”, 12”, 15”, 18” or 24”
Specifications
  • Mount Type: 3-Point Mount
  • Hydraulic hoses: Standard
  • Maximum auger RPM: 93 rpm
  • Gallons per minute rating: 10 -25 GPM @ 1500 to 3500 PSI
  • Max torque @ 2500 PSI: 1605 ft. lb.
  • Weight with 6" auger: 235 lb.
  • Auger length: 48 in.
  • Auger flighting thickness: 1/4 in.
  • Auger pipe: 2 1/2 in. dia.
  • Auger teeth: Forged, individually replaceable - 40 deg. angle installed on flat side; 50 deg. angle installed on angled side
  • Number of teeth: (6 in. - 2 teeth) (9 in. & 12 in. - 4 teeth) (15 in. - 5 teeth) (18 in. - 6 teeth) (24 in. - 10 teeth)
  • Pilot: Cast steel, 3 drill points
  • Auger drive: Hydraulic
  • Gearbox: 3.18:1 Ratio
  • Gearbox oil capacity & type: 4.7 Pints of gear lube 80-90W EP
  • Output shaft on gearbox: 2 in. O.D. round
  • Hitch type: 3-Point Cat I or II
  • Yoke: 2 7/8 in. O.D.
  • Boom: Reinforced 3 1/2 in. O.D.
Options and Accessories
  • Auger sizes: 6 in., 9 in., 12 in., 15 in., 18 in., or 24 in.
  • Hydraulic Down Pressure Kit: Available
  • Storage stand: Available
  • Auger extensions: 7 in. and 14 in. extensions available

Specs

General

Boom
Reinforced 3-1/2 in. OD
Auger Size
6, 9, 12, 15, 18 or 24 in.
Gear Reduction
3.18:1 Ratio
Weight
235 lb. with 6 in. auger

Related Products