2017 Land Pride PD25

Call For Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
PD25

Overview

Description

Nurseries, tree farms, landscapers, contractors, construction companies, farmers, ranchers and municipalities will find the Land Pride PD25 Series Post Hole Diggers a good fit for their heavy-duty applications. The PD25 Series is designed for Category 1 or 2 three-point attachment, offers a 48" auger length, and a choice of 6", 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips.

Features
  • Cat. 1 or 2 Hitch: Fits a wider variety of tractors by fitting Cat. 1 & 2.
  • 2 7/8" Yoke: 3/16"+ Wall thickness for strength.
  • 3 1/2" Reinforced boom: 7/32" Wall with 3/8" x 2" bar for strength.
  • Auger flighting: Constant thickness on 1/4" flighting vs. tapered.
  • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips.
  • Gearbox HP rating: 25 Series: 25-55 HP and 35 Series: 30-75 HP.
  • 2" Output shaft: Fits most other auger manufacturers for users who don’t need a new auger.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Cat. 3 driveline with shear-pin or optional radial pin clutch: Protection against obstructions. Radial pin works like a ‘ratchet’ to continually put driving force on the auger in tough conditions.
  • Alignment handle (optional): Guide the auger from the tractor seat.
  • Down pressure kit (optional): Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground.
  • Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor.
Specifications
  • Tractor HP Range: 25 to 55 HP
  • Weight Without Auger: 186 lbs.
  • Auger Length: 48 in.
  • Auger Flight Thickness: 1/4 in.
  • Auger Pipe: 2 1/2 in. ID
  • Auger Tooth Construction: Forged, Individually Replaceable. 40 Degree angle installed on flat side; 50 Degree angle installed on angled side
  • Number of Teeth: (6 in. - 2 teeth) (9 in. & 12 in. - 4 teeth) (15 in. - 5 teeth) (18 in. - 6 teeth) (24 in. - 8 teeth)
  • Pilot: Cast steel, 3 drill points
  • Driveline Cat.: Cat. III Shear bolt - Standard; Cat. III Radial pin clutch - Optional (Recommended on Auger Sizes 15 in. and above.)
  • Maximum Operating PTO Speed: 300 RPM
  • Gearbox: 1 3/8 in. 6B spline input shaft, 3.18:1 Ratio
  • Gearbox Oil Capacity & Type: 4.6 Pints of SAE80-90W EP oil
  • Output Shaft: 2 in. O.D. Round
  • 3-Point Hitch Cat.: Cat. I & II
  • Boom Tube: 3 1/2 in. O.D.
  • Yoke Tube: 2 7/8 in. O.D.
Options and Accessories
  • Auger Sizes (Options): 6, 9, 12, 15, 18, or 24 in.
  • Auger Extensions (Accessories): 7 in. & 14 in. Extensions Available
  • Cat. III Torque Limiter Driveline: Available
  • Hydraulic Down Pressure Kit: Available
  • Storage Stand: Available

Specs

General

Boom
3 1/2 in. O.D.
Auger Size
6, 9, 12, 15, 18, or 24 in.
Gear Reduction
3.18:1 Ratio
Weight
186 lb. without auger

Related Products