2017 Land Pride RCB6615 Series 2

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
RCB6615 Series 2

Overview

Description

The Land Pride RCB6615 Rotary Cutter provide excellent cutting performance on gently sloping or slightly contoured rights-of-way, roadsides, pastures, set-aside acres, or residue in row crop fields. The 15’ cutting width, 2" to 14" cutting height and ability to cut heavy weeds and thick brush up to 4.5" in diameter make them well suited for these applications. Both models offer pull-type, self-leveling clevis hitches for attachment to 50-250 HP tractors. Both models offer various axle configurations and safety guard selections making them an excellent choice for agricultural, state, and municipal mowing applications.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Gearboxes are capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • Self-leveling hitches: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing the U-joints and inner profiles.
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: Allows clean cutting of material and even distribution. See Specifications for actual FPM.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 4 1/2".
  • Pre-cut chamber: Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
  • Reinforced leading edge: Front of deck can withstand heavy brush and saplings.
  • 12" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 10 gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks.
  • 3/16" Round stump jumper backed with a 1" thick mounting plate: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • Spindle Nut Protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Greasable wing folding hinges: Provides for a long hinge life and allows wings to fold up and down with less stress.
  • 1" Solid hinge rods: Gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport locks: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
  • Collapsible 1" Leveling rods: Prevents damage and failure to leveling rods. Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Enclosed dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Slow moving vehicle sign (SMV): Required for transporting on roadways and mowing along side roads.
Specifications
  • Horsepower Range: 50 to 250
  • Gearbox Horsepower: 250 HP Splitter, 210 HP Center & Wing
  • Gearbox Oil Capacity: 5.5 Pints: Divider Gearbox; 10 Pints: Center deck, LH deck & RH deck spindle gearboxes
  • Gear Box Lubrication: Gear Lube 80-90W EP
  • Cutting Capacity: 4 1/2 in.
  • Machine Tongue Weight: 1,842 lbs. Equipped with chain guards, 6 AC tires and standard clevis
  • Machine Total weight: 5,738 lbs. Equipped with chain guards, 6 AC tires and standard clevis
  • Blade Tip Speed At 540 RPM: Center Blades = 16,300 FPM; Wing Blades = 16,300 FPM
  • Tongue Types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Cutting Width: 15 ft. - 0 in.
  • Overall Width: 15 ft. - 8 1/2 in.
  • Minimum Transport Width: 7 ft. - 5 1/4 in. (With tandem wheels & cutting height at 2 in.)
  • Overall Length: 17 ft. - 0 1/2 in. (With tandem wheels & cutting height at 2 in.)
  • Deck Height: 12 in.
  • Cutting Height: 2 in. to 14 in.
  • Lift Hydraulics - Center Deck: 3 1/2 in. x 8 in. Re-phasing hydraulic cylinder with hoses, fittings & stroke control spacers
  • Lift Hydraulics - Right Wing: 3 1/4 in. x 8 in. Re-phasing hydraulic cylinder with hoses & fittings
  • Lift Hydraulics - Left Wing: 3 in. x 8 in. Re-phasing hydraulic cylinder with hoses & fittings
  • Wing Hydraulics: Two independently plumbed 3 1/2 in. x 8 in. dual-acting hydraulic cylinders complete with hoses & fittings
  • Wing Transport Protection: Transport Locks with hitch pins
  • Deck Material: 10 gauge Top Deck and 7 gauge Bottom Deck
  • Side Skirt Material: Bolt-on replaceable 1/4 in. plate
  • Skid Shoes Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
  • Skid Shoes Center Deck: Replaceable: 2 skid shoes
  • Six Blades (2 per Carrier): 1/2 in. x 4 in. Heat Treated Free Swinging Alloy Steel with up lift
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 3/16" Thick round dish shaped pan, reinforced with 1" thick blade mounting plate; or optional Shredder Kit
  • Deck Ring: Optional 1/2 in. x 3 in. fully welded
  • Front & Rear Guards: Optional rubber, single chain, double chain or double chain with cable
  • Input Driveline: Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate & Wing Drivelines: Cat. 5 with slip-clutch
  • Wheel Options Standard Axle & Tandem Axle: 6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 24" x 12 ply used pneumatic aircraft tires, and 29" x16 ply used pneumatic aircraft tires.
  • Number of Wheels Standard Axle: 6 - Wheel option: 4 on transport axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle
  • Number of Wheels Tandem Axle: 8 - Wheel option: 4 on transport axle and two on each wing axle
  • Standard Transport Axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
  • Standard Colors: Beige
  • Optional Colors: Red, Green, Orange, and Yellow

Specs

General

Working Width
15 ft.
Width
15 ft. 8 1/2 in.
Length
17 ft. 1/2 in.
Weight
5,738 lb.
Recommended HP
50-250 hp

Related Products