2017 Land Pride RCF2772

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
RCF2772

Overview

Description

The RCF27 Series Rotary Cutters is a smooth top version of our RCR26 Series, offering the same great cut and ideal for grass, weeds, crops, brush and small trees up to 3 inches in diameter. These units come equipped standard with a 3/16" thick heavy-duty stump jumper and replaceable bolt-on skid shoes. Optional shields are available for the front and rear.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • 130 HP gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Cat. 4 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 gauge deck construction with 1/4” side skits: Can withstand more abuse than lighter gauge decks.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Adds additional strength.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 11 1/4” Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2” to 12” Cutting height: Provides for a wide range of cutting conditions.
  • High cutting capacity: Can cut brushy areas with saplings up to 3”.
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2” x 4” Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16” Plate stump jumper: Standard round stump jumper slides over stumps, rocks and debris.
  • High blade tip speed RCF2760 = 12,384 FPM RCF2772 = 14,861 FPM: Ensures clean cut.
  • Laminated tailwheel: Laminated material is long lasting in rough conditions.
  • 4” x 15” Solid rubber tailwheel: Can’t go flat.
  • 1 1/2” Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Optional Guarding: Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and single chain guarding on the back.
Specifications
  • Machine Weight: 1072 lbs. with front and rear Single Chain Guards
  • Hitch: Category l or II with floating top linkage, Quick Hitch ready
  • Cutting Width: 72 in.
  • Overall Width: 79 in.
  • Overall Length: 121 3/4 in.
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 11 1/4 in.
  • Cutting Height: 1 1/2 in. - 12 in.
  • Cutting Capacity: 3 in. Diameter
  • Recommended Tractor PTO HP: 35-130 HP
  • PTO Speed: 540 RPM
  • Gearbox: 540 RPM PTO driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8 in.-6 spline input shaft and 2 in. output shaft
  • Gearbox Lubricant: EP 80-90W oil
  • Gearbox oil Capacity: 7 pints
  • Deck Construction: All welded deck
  • Deck Material Thickness: 10 Gauge
  • Side Skirt Material Thickness: 1/4 in.
  • Skid Construction: Replaceable bolt on skid shoes
  • Stump Jumper: 3/16 in. x 30 1/2 in. Round Pan
  • Blades (2): 1/2 in. x 4 in. x 29 in. Heat treated alloy steel free-swinging high lift
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 14,861 FPM
  • Driveline: ASAE Category 4
  • Driveline Protection: 4 plate slip clutch
  • Tailwheel Mount Assembly: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4.00 in. x 8 in. x 15 in. Laminated tire with cast iron hub and tapered roller bearings
  • Front Guard: Optional: Rubber Belting or Single Chain Guard
  • Rear Guard: Single Chain Guard

Specs

General

Working Width
72 in.
Width
79 in.
Length
121 3/4 in.
Weight
1,072 lb.
Recommended HP
35-130 PTO hp

Related Products