2017 Land Pride RCF2784

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
RCF2784

Overview

Description

The RCF2784 Rotary Cutters are heavy-duty smooth top versions of the RCR26 Series. The 84" width helps you tackle small trees up to 3" in diameter, as well as grass, weeds, crops and brush. The Land Pride RCF2784 is available as Cat. II or III 3-point or Pull-type model. The Category 4 driveline is protected with a 4-plate slip clutch. This unit comes with a standard 3/16" heavy-duty round stump jumper and replaceable, bolt-on skid shoes.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Cat. 4 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-Point floating top link: Permits deck to follow the terrain for an even cut.
  • Lower clevis type 3-Point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 gauge deck & 1/4" side skirt construction: Can withstand more abuse than lighter gauge decks.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Adds additional strength.
  • Extended cutter front: For increased material flow and added protection.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 10 1/8" Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • 1/4" x 2 1/2" x 18 7/16" Long skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16" x 24" x 38" Oval stump jumper: Standard Oval stump jumper slides over stumps, rocks and debris.
  • High blade tip speed: Ensures clean cut.
  • 15" Laminated tailwheel: Laminated material is long lasting in rough conditions. Can’t go flat.
  • 1 1/2" Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Optional Front Guarding: Protect against flying debris. Customer can choose to include single chain or rubber guarding.
  • Single Chain Rear Guarding: Protect against flying debris.
Specifications
  • Machine Weight 3-Point Single Tailwheel: 1,354 lbs. with front & rear chain guards
  • Machine Weight 3-Point Dual Tailwheel: 1,427 lbs. with front & rear chain guards
  • Machine Weight Pull-Type Dual Tailwheel: 1,632 lbs. with front & rear chain guards and hydraulic type adjustment
  • Hitch: Category II & III with floating top linkage, Quick Hitch adaptable
  • Cutting Width: 84 in.
  • Overall Width: 89 in.
  • Overall Length 3-Point Single Tailwheel: 132 1/2 in.
  • Overall Length 3-Point Dual Tailwheel: 130 3/8 in.
  • Overall Length Pull-Type Dual Tailwheel: 159 1/4 in.
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 10 1/8 in.
  • Cutting Height: 1 1/2 in. to 12 in.
  • Cutting Capacity: 3 in. Diameter
  • Recommended Tractor PTO HP: 60-130 HP
  • PTO Speed: 540 RPM
  • Gearbox Ratio: 1:1.21
  • Gearbox Construction: Speed-up beveled gears, cast iron housing, 1 3/8 in.-6 spline input shaft and 2 in. output shaft
  • Gearbox Oil Capacity & Type: 6.5 Pints of EP 80-90W oil
  • Deck Construction: All welded deck
  • Deck Material Thickness: 10 Gauge (.134 in.)
  • Side Skirt Material Thickness: 1/4 in.
  • Skid Shoes: 1/4 in. x 2 1/2 in. x 18 7/16 in. Long bolt-on replaceable skid shoes
  • Stump Jumper: 3/16 in. x 24 in. x 38 in. Oval Pan with 1 in. thick blake holder bar
  • Blades (2): 1/2 in. x 4 in. x 31 in. Heat treated alloy steel free-swinging high lift
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 14,369 FPM
  • Driveline: ASAE Category 4
  • Driveline Protection: 4 Plate slip clutch
  • Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4 in. x 8 in. x 15 in. Laminated tire with cast iron hub
  • Front Guard Optional: Rubber Belting
  • Front Guard Optional: Single Chain Guard
  • Rear Guard Optional: Single Chain Guard

Specs

General

Working Width
84 in.
Width
89 in.
Length
130 3/8-159 1/4 in.
Weight
1,354-1,632 lb.
Recommended HP
60-130 PTO hp

Related Products