2017 Land Pride RCF3610 Pull-Type

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Land Pride
Model
RCF3610 Pull-Type

Overview

Description

Building on the success of the RCR35 Series, Land Pride is proud to offer the RCF3610 dual-spindle rotary cutter – an updated, flat-top version of the original RCR35. With larger gear boxes, larger cutting capacity, and a deeper deck, the RCF3610 is the ideal dual-spindle cutter for narrow areas in pastures, along roadsides, or in tree groves.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 540 or 1000 RPM: Fits wider variety of tractors.
  • High Gearbox HP rating: Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.
  • 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity.
  • 3 Gearboxes: Allows equal torque to be spread to left and right gearbox.
  • Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
  • Pull-type unit Constant velocity driveline U-Joint option (RCF3610 only): Reduces chatter and extends life of U-joint during turns.
  • Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
  • 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-Point & Semi-mount Hitches or Pull-type Hitch: Fits a wide range of tractors. Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without enough lift capacity.
  • 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
  • 1/4" Thick sidewalls: Protects sidewalls from thrown objects.
  • Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
  • Pull-type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain.
  • Chain or rubber guard option: Reduces flying debris.
  • Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
  • Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
  • 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
  • 1" x 5" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
  • 1/2" x 4" Heat-treated blades: Heat-treated blades last longer than non-heat-treated blades.
  • 3" Diameter cutting capacity: Aids in cutting brush.
  • High blade tip speed: Means cleaner cutting.
  • Laminated tires: Laminated tires can handle almost any condition and don’t go flat.
  • Quick-Hitch adaptable: 3-point and semi-mount are Quick-hitch adaptable.
  • Paint Options: Choice of red, orange, green, or tan to match popular tractor lines.
Specifications
  • Machine Weight with Front & Rear Rubber Guards: 2,430 lb. (also includes Hydraulic Cylinder & 21 in. Wheels)
  • Hitch: Pull-Type - With Dual Self Level Rods
  • Parking Jack: Parking Jack on Tongue of Pull Type Cutter
  • Cutting Width: 10 ft. -0 in.
  • Overall Width: 10 ft. - 6 1/2 in.
  • Overall Length: 13 ft. - 1 in.
  • Deck Height: 13 in.
  • Cutting Height: 2 in. - 12 in.
  • Cutting Capacity: 3 in.
  • Tractor H.P. Rating (PTO): 50 - 130
  • Gearbox Rating H.P.: T-Box - 210 hp, Outboard 205 hp
  • Gearbox: 540 rpm PTO Driven Gearbox, Cast Iron Housing, Beveled Gears
  • Gearbox Input/ Output Shaft Size: Input Shaft = 1 3/4 in. - 20 Spline, Output Shaft = 2 3/8 in. Dia.
  • Gearbox Lubrication: 80-90W EP Gear Lube
  • Gearbox Oil Capacity End Boxes: Omni = 5.5 Pints or Comer = 10 Pints
  • Gearbox Oil Capacity T-Box: Comer = 4.5 Pints
  • Deck Material Thickness: 10 gauge
  • Deck Side Skirt Thickness: 1/4 in.
  • Skids: Replaceable
  • Stump Jumper: 2 ea. - 3/16 in. Round Pan
  • Blades (4): 1/2 in. x 4 in. Heat Treated Free-Swinging Suction Blades
  • Blade Bolts: Keyed with Harden Flat Washer and Lock Nut
  • Blade Tip Speed: 540 rpm 17,100 fpm
  • Driveline: ASE Cat. 4 Equal Angle Shaft or Constant Velocity U-Joint
  • Driveline Protection: 540 rpm - 4 plate Slip Clutch, Rubber Flex Coupler to Wing Boxes
  • Tailwheel Option - w/ Single Spindle: 2 Tires: 6 in. x 9 in. x 21 in. Laminated or 24 in. x 7.7 in. Recap Foam Filled Aircraft or 29 in. x 16 ply Aircraft
  • Tailwheel Option - w/ Dual Spindles: 4 Tires: 6 in. x 9 in. x 21 in. Laminated or 24 in. x 7.7 in. Recap Foam Filled Aircraft or 29 in. x 16 ply Aircraft
  • Wheel Bearings: Tapered Roller Bearing in Cast Iron Hub
  • Shock Absorption: Spring Shock Absorber on Axle of Semi-Mount & Pull Type
  • Front Guard: Optional: Rubber deflector, Single Chain guard, or Double Chain Guard
  • Rear Guard: Optional: Rubber deflector, Single Chain guard, or Double Chain Guard

Specs

General

Working Width
10 ft.
Width
10 ft. 6 1/2 in.
Length
13 ft. 1 in.
Weight
2,430 lb.
Recommended HP
50-130 PTO hp

Related Products