2017 Land Pride RCM3620

Call for Price

Land Pride



Land Pride's 20-foot RC3620 Series Rotary Cutter is the perfect complement to our full line of folding cutters. This cutter, also available in an “M” model (1000 RPM), is designed for use in wide-open grass mowing applications. With proper care it will provide years of dependable use and features a 7-year limited gearbox warranty.

The RC3620 is the ideal rotary cutter for grassy fields, pastures, waterways, buffer strips, and set-aside acres and handles brush up to 2" in diameter. With tips speeds of 16,000 to 16,500 this unit will make quick and efficient work of the largest jobs. The RC3620 has a long list of features and adds to an impressive line of rotary cutters from Land Pride.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty* (* Years 6 & 7 Parts Only): Shows confidence in gearbox integrity.
  • 250 HP divider gearbox; 130 HP center & wing gearboxes: A rugged heavy-built gearboxes capable of handling heavy-cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • 2" Output gearbox shaft: Large output shaft handles shock loads better.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions.
  • Easy Greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • 2 or 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: Allows clean cutting of material & even distribution. See Specifications for actual FPM.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Good cutting capacity: Can cut brushy areas with saplings up to 2".
  • 13" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar: Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • Spindle Nut Protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • 10 gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 1/4" side skirt: Reduces debris piercing possibilities.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge gives greater strength to cutter and hinge area.
  • Wing transport locks: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned center axle: Protects unit from bumps and ground shock, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Rephasing lift cylinders: Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.
  • 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Double swivel hitch option: Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.
  • LP Performance Hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting & can’t go flat
  • Deck rings (optional): Keeps blades from damaging the deck.
  • PTO Horsepower: 70 to 160 hp
  • Gearbox Horsepower: 250 hp Splitter; 130 hp Center & Wing
  • Gearbox Oil Capacity: 5.18 Pints: Divider Gearbox; 6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes
  • Gear Box Lubrication: Gear Lube 80-90W EP
  • Cutting Capacity: 2 in.
  • Weight - Total Machine: 6,680 lb. (Front & Rear Single Chain guards, 6 AC tires, CV Driveline, & standard clevis.)
  • Weight - Tongue Weight: 1,750 lb.
  • Blade Tip Speed RCM3620: 16,500 FPM
  • Hitch Types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lb.)
  • Cutting Width: 20 ft. - 0 in.
  • Overall Width: 20 ft. - 10 in.
  • Minimum Transport Width: 9 ft. - 11 in. (With cutting height at 2 in.)
  • Overall Length: 17 ft. - 6 in. (With cutting height at 2 in.)
  • Deck Height: 13 in.
  • Cutting Height: 2 in. to 12 in.
  • Lift Hydraulics - Center Deck: 3 1/4 in. x 8 in. Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
  • Lift Hydraulics - Right Wing: 3 in. x 8 in. Rephasing hydraulic cylinder with hoses & fittings.
  • Lift Hydraulics - Left Wing: 2 3/4 in. x 8 in. Rephasing hydraulic cylinder with hoses & fittings.
  • Wing Folding Hydraulics: Two 3 in. x 12 in. single-acting hydraulic cylinders complete with hoses & fittings.
  • Wing Flex: 45 deg. up, 20 deg. Down while cutting.
  • Deck Material: 1 - Piece, 10 gauge.
  • Side Skirt Material: 1/4 in. plate.
  • Skid Shoes - Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
  • Skid Shoes - Center Deck: Replaceable: 2 skid shoes
  • Six Blades (2 per Carrier): 1/2 in. x 4 in. Heat Treated Free Swinging Alloy Steel with up lift.
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut.
  • Stump Jumper / Blade Holder: 10 Gauge round dish shaped pan, reinforced with 1 in. x 4 1/2 in. blade mounting bar.
  • Deck Ring: Optional 3/8 in. formed and welded.
  • Front & Rear Guards: Optional single chain or double chain.
  • Input Driveline: ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate & Wing Drivelines: Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
  • Tire Options: 6 in. x 9 x 21 in. Laminated tires; 29 in. x 9 in. Used aircraft tires without foam filling; 27 in. x 7.75 in. Used aircraft tires with foam filling
  • Number of Wheels: 6 - Wheel option: 4 on transport axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle.
  • Standard Transport Axle: Spring-cushioned on center transport axle.
  • Axle Fasteners: 1 1/4 in. Greasable pins
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts.
  • Standard Color: Beige
  • Optional Colors: Red, Green, or Orange



Working Width
20 ft.
20 ft. 10 in.
17 ft. 6 in.
6,680 lb.
Recommended HP
70-160 hp

Related Products