2017 Land Pride RCM5014

Call for Price

Land Pride



Land Pride's heavy-duty RC5014 and RCM5014 Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured rights-of-way and roadsides. The 14' cutting width, 2" to 14" cutting height and ability to cut weeds and brush up to 3" in diameter make them well suited for highway maintenance applications. Both models offer pull-type, self-leveling clevis hitches as standard equipment for attachment to 70-250 HP tractors, and offer various, tire, rim, and axle selections as well as various safety guard selections, making them an excellent choice for state and municipal mowing applications.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • Factory assembled: Saves customer set-up time and money.
  • Fully welded deck: Fully welded deck adds strength.
  • 7 Year gearbox warranty* (* Years 6 & 7 Parts Only): Shows confidence in gearbox.
  • 250 HP Divider gearbox; 210 HP center & wing gearboxes: A rugged heavy built gearboxes capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Star profile drivelines: Star profile spreads load out to many points on the shaft. More apt to resist bending and twisting under shock loads and harsh mowing conditions.
  • Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed (See specifications for actual FPM): Allows for a clean cut of material and even distribution.
  • 6" Blade overlap: Generous blade overlap eliminates skipping, especially in turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 3".
  • 10 1/2" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 3/16" Stump jumper backed with a 1" thick mounting bar: Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
  • 3/16" Deck thickness: Heavy enough to handle conditions but not weigh unit down.
  • Self-leveling pull-type hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Hinged wing section: Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Safety feature. Holds wing section up in case of hydraulic pressure loss.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • 5" Square rear axle tubing: Heavy axle to handle harsh conditions.25
  • Spring-cushioned center-axle: Protects unit from bumps and ground shock.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
  • Double swivel hitch: Great for uneven terrain, reduces drawbar wear.
  • Bar-tite hitch: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • 5 or 6 Wheel option: Dual wheels on the outer wing are ideal when mowing in areas where the wing needs to flex up hill. The outer wheel rides farther up the embankment and keeps the deck from gouging. The extra wheel on the outer wing deck provides better load distribution.
  • Wheel options: Laminated tires: Eliminates flats; Airplane tires without foam filling: Give better cushion while transporting; Airplane tires with foam filling: Give better cushion while transporting & can’t go flat.
  • Deck rings (optional): 1/2" x 3" full welded deck ring keeps blades from damaging the deck.
  • Min. PTO Horse Power: 70
  • Gear Box Horsepower: 250 HP Splitter, 210 HP Center & wing
  • Gear Box Lubrication & Capacity: Center deck & wings: 10 pints of Gear Lube 80-90W EP; Divider Gearbox: 5.5 pints of Gear Lube 80-90W EP
  • Cutting Capacity: Up To 3 in. Material
  • Machine Weight: 7,282 lbs. Approx. (With single row chain guards, 6 airplane tires, dual axle, 540 CV main driveline)
  • Blade Tip Speed @ 1000 RPM: Center blade: 18,165 FPM & Wing blade:18,317 FPM
  • Hitch Weight: 2300 lbs.
  • Hitch Types: Pull-Type, Self-Leveling Hitch & Clevis
  • Hitch Jack: Standard hand crank
  • Wing Offset: Right wing model with weight box on the left side
  • Cutting Width: 13 ft.-6 in.
  • Overall Width: 14 ft.-7 in.
  • Minimum Transport Width: 8 ft.-9 in.
  • Overall Length: 19 ft.-3 in.
  • Deck Height: 10 1/2 in.
  • Cutting Height: 2 in. to 14 in. High with hydraulic cylinder and stroke control spacers
  • Lift Hydraulics: 4 in. x 8 in. hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Hydraulics: 3 1/2 in. x 12 in. hydraulic cylinder, hose & fittings
  • Wing Transport Protection: Wing transport lock
  • Deck Material Thickness: 3/16 in.
  • Side Skirt Thickness: 1/4 in.
  • Skid Shoes Wing Deck: Reversible & replaceable
  • Skid Shoes Center Deck: 2 - Replaceable
  • Blades - 4 (2 per Carrier): 1/2 in. x 4 in. Thru-harden free swinging alloy steel with uplift
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 3/16 in. Round bolt-on stump-jumper with 1 in. diamond shaped blade bar
  • Deck Ring: Optional 1/2 in. x 3 in. fully welded
  • Front & Rear Guards: Optional rubber, single chain or double chain
  • Heavy Duty Input Driveline Options: Conventional u-joint ASAE Category 5 with 1 3/8 in.-21 spline; Constant velocity u-joint ASAE Category 5 with 1 3/8 in.-21 spline or 1 3/4 in.-20 spline
  • Heavy Duty Connecting Drivelines: ASAE Cat. 5 with slip-clutch
  • Wheel Options: 6 in. x 21 in. Laminated tires or 27 in. x 7.75 in. x 15 in. Used aircraft tires w/wo foam filling or 15 in. Rims
  • Number of Wheels: 5 - Wheel option: 4 on transport axle and one on wing axle; 6 - Wheel option: 4 on transport axle and two on wing axle.
  • Transport Axle: Spring-cushioned on center transport axle
  • Hubs: Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4 in. shafts
  • Colors: Standard color: Beige; Optional colors: Green or Red



Working Width
13 ft. 6 in.
14 ft. 7 in.
19 ft. 3 in.
7,282 lb.
Recommended HP
Min. 70 PTO hp

Related Products