2017 STIHL MS 362 C-MQ

Call For Price


Availability
Brochure
Year
2017
Manufacturer
STIHL
Model
MS 362 C-MQ

Overview

Description

The MS 362 chainsaw plus STIHL M-Tronic™ engine management technology and the added feature of STIHL Quickstop® Plus.



Professional power meets enhanced safety and efficiency. The MS 362 C-MQ features the same great power, weight and fuel efficiency as the MS 362, but also features our exclusive STIHL M-Tronic™ engine management technology. STIHL M-Tronic™ digitally monitors and automatically compensates for changes in elevation, temperature, fuel quality – including octane levels, and dirty air filters. The MS 362 C-MQ also features STIHL Quickstop® Plus designed to stop the chain in one second when you completely release your right hand from the rear handle.

Features
  • Reduced-Emission Engine Technology - Caring for Nature: The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
  • Built in the USA: Indicates products that are built in the United States from domestic and foreign parts and components.
  • Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
  • Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • STIHL M-Tronic™ : This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
  • STIHL Quickstop® Plus (Q) - an additional chain braking feature: STIHL offers an additional, manually-activated chain brake on some models. This system is designed to engage when the operator’s right hand completely releases the rear handle, stopping the chain within one second. Available on some models.
  • Toolless fuel and oil caps with retainers: Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.
  • Decompression Valve: The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Specifications
  • Displacement: 59.0 cc (3.6 cu. in.)
  • Engine Power: 3.5 kW (4.69 bhp)
  • Powerhead Weight: 5.9 kg (13.0 lb.)
  • Fuel Capacity: 600 cc (20.3 oz)
  • Chain Oil Capacity: 325 cc (11.0 oz.)
  • OILOMATIC® Chain: 3/8 in. RS3
  • Guide Bar Lengths* (Recommended Ranges): 40 to 63 cm (16 in. to 25 in.) STIHL ROLLOMATIC®
  • Power Source: Gas
NOTES:
STIHL recommends #3624 (33 RS3-72) OILOMATIC® Saw Chain and 20” 3003 008 8921 Ematic™ guide bar. The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.

Specs

Engine

Displacement
3.6 cu. in. (59.0 cc)
Horse Power
4.69 bhp (3.5 kW)

General

Weight
13.0 lb. (5.9 kg)
Bar Length Options
16 in. to 25 in. (40 to 63 cm)

Related Products