2018 Kohler Engine ECH740

Call For Price


Availability
Brochure
Year
2018
Manufacturer
Kohler Engine
Model
ECH740

Overview

Description

If you want lower operating costs and less downtime, the fuel-sipping KOHLER® Command PRO® EFI is your engine. Closed-loop electronic fuel injection saves you big on gas and covers more ground between fill ups.* (*Compared to a comparable KOHLER carbureted engine under comparable loads and duty cycles)

Features
  • Saves significantly on fuel, with less downtime for refueling*
  • 3-year unlimited-hour limited commercial warranty
  • Advanced sensor technology allows engine to optimize performance by automatically adapting to operating conditions
  • Starts like your car - just turn the key and go
  • EFI Diagnostic Software provides quick and easy troubleshooting to minimize downtime
Specifications
  • Engine type: 4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block, electronic fuel injection
  • Model: Command PRO EFI ECH740
  • HP (kW): 25(18.6)
  • Displacement (cc): 45 (747)
  • Bore in (mm): 3.3 (83)
  • Stroke in (mm): 2.7 (69)
  • Gross Torque ft lbs (Nm): 38.8 (52.6)
  • Compression Ratio: 9.1:1
  • Dry Weight lbs (kg): 108 (49)
  • Oil Capacity US qts (L): 2 (1.9)
  • Lubrication: Full pressure w/full-flow filter
  • Dimensions LxWxH (in): 14.8 x 18.9 x 24.5
  • Backpressure Limit: 50
  • Certified Power HP (kW): 24.5 (18.2)
  • Certified RPM: 3600
  • Engine Type: Commercial
NOTES:
Length is front to rear of engine. Width is valve cover to valve cover. Height is mounting surface to top of air cleaner. Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation. Backpressure Limit: Inches of H20 @ 3600 RPM WOT Certified Power HP (kW): J1995 power and torque certified by 3rd Party Witness

Specs

Engine

Engine Type
4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block, electronic fuel injection
Bore x Stroke
3.3 in. (83mm) x 2.7 in. (69mm)
Displacement
747cc
Compression Ratio
9.1:1
Horsepower
24.5 hp (18.2 kW)
Torque
38.8 ft.lb. (52.6 Nm)

Dimensions

Length
14.8 in.
Width
18.9 in.
Height
24.5 in.
Weight
108 lb. (49 kg)

Related Products