2018 STIHL MS 441 C-M MAGNUM®

Call for Price


Availability
Brochure
Year
2018
Manufacturer
STIHL
Model
MS 441 C-M MAGNUM®

Overview

Description

Powerful professional chainsaw with STIHL M-Tronic™ engine management system.



When most people think of STIHL, they think of a no-holds-barred, bulletproof professional chainsaw like the MS 441 C-M MAGNUM®. And for good reason. No chainsaw is designed like it. And no chainsaw performs like it. At the heart of the MS 441 C-M MAGNUM® engine is the STIHL M-Tronic™ engine management system that intelligently manages the operating performance of the engine. (The brains of the MS 441, if you will.) In the field, the M-Tronic™ automatically and constantly adjusts the fuel-air mixture, maintaining maximum operating efficiency under varying conditions like altitude, outside temperature, a dirty air filter or poor fuel quality. The STIHL M-Tronic™ system compensates for these factors by replacing low and high-speed carburetor adjustment screws (old technology) with electronic monitoring of the engine's performance and digitally optimizing the fuel/air mixture over the entire RPM range (new technology). This intelligent operating system also provides a simplified warm start procedure, and a decompression valve for easier starts. A highly versatile, state-of-the-industry saw for professional-level jobs, the innovations on the STIHL MS 441 C-M system work hard to make your toughest jobs easier. (Wrap-handle version available in select areas.)

Model Features
  • Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • Reduced-Emission Engine Technology - Caring for Nature: The STIHL Inc. “Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
  • STIHL M-Tronic™: This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.: See it in action!
  • Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine's filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
  • Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • Toolless fuel and oil caps with retainers Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.
  • Decompression Valve: The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Specifications
  • Displacement: 70.7 cc (4.3 cu. in.)
  • Engine Power: 4.2 kW (5.6 bhp)
  • Powerhead Weight: 6.6 kg (14.6 lb.)
  • Fuel Capacity: 725 cc (24.5 oz.)
  • Chain Oil Capacity: 360 cc (12.2 oz.)
  • Oilomatic® Chain: 3/8" RS3
  • Guide Bar Lengths (Recommended Ranges): 40 to 80 cm (16" to 32")STIHL ROLLOMATIC® E Super
  • Power Source: Gas
NOTES:
STIHL recommends #3624 (33 RS3 84) OILOMATIC® saw chain and 25" 3003 000 4030 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

Specs

Engine

Displacement
4.3 cu. in. (70.7 cc)
Horse Power
5.6 bhp (4.2 kW)

General

Weight
14.6 lb. (6.6 kg)
Bar Length Options
16 in. to 32 in. (40 to 80 cm)

Related Products